Orgonite Ingredients

An orgone device, or “orgonite” is a device which converts stagnant orgone energy (DOR) to positive, healthy orgone energy (POR). Orgonite contains a 50-50 ratio of organic and inorganic material. It also contains at least one quartz crystal, and often additional crystals.

What is orgonite?
  • Save
Orgonite with quartz and rainbow tourmaline

Organic material – The most commonly used material, and the material I use in my orgone devices, is polyester resin. It is classified as an organic material because it is composed from petrochemicals. Organic materials attract and hold orgone energy.

Inorganic material – Metal shavings are used, often aluminium or copper as they are widely available. The higher the surface area is, i.e. the smaller the shavings, the more effective the orgonite is. Metals attract, then immediately repel orgone energy.

Because the organic material attracts and holds orgone energy, and the metal repels it, a “scrubbing” action takes place, where the stagnant energy is being rapidly pushed and pulled back and forth, essentially cleaning it.

Crystal – The main crystal used in orgonite is quartz, or any other crystal which has a piezoelectric effect. This means that when the crystal is ut under pressure, it generates a small electric charge. Resin shrinks when it cures, so the quartz is constantly under pressure. It is not known exactly how the piezoelectric effect affects the orgone energy (although there are plenty of theories), but suffice to say, orgonite without quartz in it can in the long run become clogged up with DOR – the crystal is essential for the conversion of DOR to POR, otherwise the orgonite becomes merely an orgone accumulator.

Additional crystals – The orgone energy that orgonite releases is pure POR, positive but neutral. I like to add different crystals to  “flavour” the energy. For example, orgonite containing amethyst and lapis lazuli is good for all matters pertaining to spirituality and personal growth. For attracting love, I would use rhodocrosite and rose quartz to make an orgonite love pendant.

If you’re starting out making your own orgonite, you can find a longer list of all the ingredients you might need, as well as where to buy them in this article about orgonite-making supplies.


How many 3 in ร— 3 in (roughly) pyramids can you make with a gallon of resin?

Each pyramid should consist of roughly 50% resin, a bit more if you do clear layers. What I do is find out the volume of a pyramid (drop it in water and see how much the water level rises), and work it out from that ๐Ÿ™‚ To give you an idea, I can count on about 40-50 large (3.5×3.5×2.3 inch) pyramids with every 10kg of resin.

Leave a reply

You must be logged in to post a comment.
Share via